Farmington Insulation serves Shiprock, NM with home insulation, spray foam insulation, and attic insulation - including manufactured homes and older HUD-era houses throughout the Navajo Nation. We have been making the drive to Shiprock since 2018 and we show up when we say we will.

A large share of homes in Shiprock are manufactured or older HUD-era houses built in the 1970s and 1980s - structures that were often built with less insulation than current standards call for, and that have had decades to settle and degrade since. Getting the insulation right in these homes makes a real difference on both winter heating bills and summer cooling costs at this elevation. See our full approach on the home insulation page.
Shiprock's high-desert climate swings hard between hot summers and freezing winters, and manufactured homes in particular have gaps around plumbing penetrations, skirting edges, and utility chases that fiberglass batts cannot fully reach. Spray foam expands into those irregular spaces and seals air leaks at the same time it insulates - a single step that addresses the two biggest energy loss paths in these homes.
Older site-built homes in Shiprock - including homes built through federal housing programs on the Navajo Nation - frequently have attic insulation at depths well below what is recommended for this climate zone. Winter nights drop below freezing from November through March, and an under-insulated attic means your heating system runs far longer than it should to keep up with the cold.
The sandy and clay-heavy soil under Shiprock properties shifts with every freeze-thaw cycle, and crawl spaces here often have open or damaged venting that lets cold desert air flow freely under the floor. Insulating the crawl space perimeter keeps pipes above freezing during the hard cold snaps of December and January and eliminates the cold-floor problem that is common in single-story homes throughout this area.
Many homes in Shiprock that were built in the 1970s and 1980s still have their original insulation, which has had 40 to 50 years to settle, compress, and in some cases absorb moisture during monsoon season. Installing new insulation on top of a failing layer wastes the investment - removing the old material first is the only way to ensure the new insulation performs at the level it should.
The Four Corners area around Shiprock gets strong, sustained winds - especially in spring - that push dust and cold outside air through every gap in a home's shell. Sealing the attic penetrations, rim joists, and wall top plates before insulation goes in keeps energy inside and blowing dust out, which matters a lot in a region where spring dust storms are a regular occurrence.
Shiprock sits at about 4,900 feet elevation in the high desert of the Colorado Plateau, in the far northwest corner of New Mexico where San Juan County meets the Navajo Nation. The climate here is demanding in both directions - summer afternoons regularly reach into the mid-90s Fahrenheit, while winter nights can drop below zero. That range of more than 90 degrees between the coldest nights and the hottest days puts constant pressure on every part of a home's envelope. A manufactured home or older site-built house with thin, aging insulation has no buffer against those swings, and the heating and cooling system pays for it all year long. The monsoon rains that arrive from July through September add another layer of stress: hard desert soil does not absorb water quickly, so heavy rain pushes runoff toward foundations and crawl spaces, where moisture can saturate and ruin whatever insulation is there.
Most of the housing in Shiprock was built through federal programs in the 1970s and 1980s - structures that are now 40 to 50 years old and were constructed before modern energy codes set meaningful insulation requirements. The soil in this part of New Mexico is a mix of sandy and clay-heavy ground that expands and contracts with every wet and dry cycle. That movement opens gaps at the foundation perimeter and around crawl space sills over time, creating new air infiltration points that make existing insulation less effective. The strong spring winds common to the Four Corners area blow dust and cold air into every gap, compounding the problem. Getting insulation right here means understanding the age of the housing stock, the soil conditions, the monsoon season moisture, and the wind exposure together.
Our crew has been making the drive to Shiprock since 2018, and we pull permits and coordinate with both San Juan County and Navajo Nation authorities depending on where the property sits. Shiprock is about 25 miles southwest of Farmington on US-491, and we run regular crews out to this area - it is not a special trip that adds cost. Most of the homes we work on in Shiprock are manufactured homes or older site-built houses from federal housing programs, and our crew has experience with both - we know what to expect before we pull up to the property.
The town is built around the junction of US-491 and US-64, with residential neighborhoods spreading out in several directions from there. The Navajo Agricultural Products Industry (NAPI) farming operation northeast of town is one of the largest employers in the area, and many of the families we serve work there or nearby. The iconic Shiprock Pinnacle - Tse Bit Ai, sacred to the Navajo people - rises nearly 1,600 feet above the desert floor just west of town and is visible from most parts of the community. Whether your home is near the highway or out toward the Pinnacle, our crew knows the area and makes the trip.
We also serve communities east and north of Shiprock on a regular basis. Homeowners in Cortez, CO, about 45 miles north, are on our regular route through the Four Corners area. We also work in Farmington, the regional hub about 25 miles to the northeast, and can often schedule Shiprock and Farmington jobs on the same week to keep travel efficient.
Reach us by phone or the contact form and we respond within one business day to schedule your estimate. No commitment is needed to book the appointment.
We inspect the attic, belly board, crawl space, or walls as applicable, measure existing insulation, and check for moisture or pest damage. You receive a written estimate with itemized pricing before we schedule any work - no surprise charges on the invoice.
Most attic jobs in Shiprock finish in a single day. Manufactured home projects that include belly and sidewall work typically take two days. Our crew handles all setup, material delivery, and cleanup - you do not need to be present, though we need access at the agreed start time.
Before we leave, we walk you through the finished work and confirm the coverage matches what was agreed. For spray foam projects we provide the re-entry timeline. We are reachable for questions after the job is done.
We serve Shiprock homeowners with no-pressure estimates, written pricing, and a crew that knows manufactured homes and older housing stock in this part of the Navajo Nation. Call or submit the form below.
(505) 910-3304Shiprock is a community of roughly 8,000 to 9,000 people in the far northwest corner of San Juan County, located within the Navajo Nation near the Four Corners region where New Mexico, Arizona, Utah, and Colorado meet. The town takes its name from the dramatic volcanic rock formation - Tse Bit Ai, or Shiprock Pinnacle - that rises nearly 1,600 feet above the desert floor just west of the community and is sacred to the Navajo people. Most of the residential properties in Shiprock are manufactured homes or site-built houses constructed through federal housing programs in the 1970s and 1980s. These homes are now 40 to 50 years old and make up a housing stock that is older and more in need of insulation upgrades than many communities in the region.
The community is a local hub for the surrounding Navajo Nation area, with a hospital, grocery stores, and services that residents from a wide surrounding area depend on. The Northern Navajo Nation Fair, held each October, draws thousands of visitors and is one of the most significant community events in the region. We serve homeowners throughout Shiprock and in the nearby communities our crews visit regularly. If you are in Farmington, about 25 miles northeast, or in Bloomfield, we are in that direction regularly and can schedule your job on the same route.
High-performance spray foam that air-seals and insulates in one application.
Learn moreKeep heat in during winter and out during summer with proper attic insulation.
Learn moreLoose-fill insulation that quickly fills cavities for consistent coverage.
Learn moreSeal air leaks to eliminate drafts and lower heating and cooling costs.
Learn moreInsulate basement walls and rim joists to reduce heat loss and moisture.
Learn moreDense, moisture-resistant closed-cell foam for maximum R-value per inch.
Learn moreFlexible open-cell foam ideal for interior walls and sound dampening.
Learn moreCommercial-grade insulation for offices, warehouses, and industrial spaces.
Learn moreHeavy-duty vapor barriers to control moisture and protect your crawl space.
Learn moreProfessional vapor barrier installation to prevent mold and moisture damage.
Learn moreAdd insulation to existing homes without major renovations or disruption.
Learn moreServing these cities and communities.
Call us or submit the contact form for a free, no-obligation estimate. We serve Shiprock and the surrounding Navajo Nation communities.